JND Traders

MS COIL & PLATE

Menu

HOT ROLLED PLATE (8 – 25.4 MM)

Hot rolled steel plate provides excellent properties, like high strength, high toughness, and good weldability. It is widely used in manufacturing of pipes, construction, machinery, boiler, pressure vessel, and other manufacturing industries. It is also material for cold-rolled products and galvanized steel products. As a hot-rolled plate supplier, JND Traders Pvt Ltd offers quality hot-rolled plate at a competitive price. Welcome to contact us for more details!
 

Material Specifications

MaterialMild      /Carbon steel
Thickness          3 – 100 mm
Width                 1000-2400 mm
Length               As per requirement
Max. weight     Depads on thickness and width
Grade               API 5L Gr.B to X80M PSL 1 or 2, IS 10748 Gr.3, IS 2062 E250 to E450.
 

Sheet And Plate Weight Chart

Width mm10001200150018002400
Plate Thickness (mm)Kg/MtrKg/MtrKg/MtrKg/MtrKg/Mtr
32428354257
43138475775
53947597194
647577185113
8637594113151
107994118141188
1294113141170226
16126151188226301
20157188236283377
22173207259311415
25196236294353471
28220264330396528
32251301377452603
36283339424509678
40314377471565754
45353424530636848
50393471589707942
554325186487771036
604715657078481130
655106127659181224
705506598249891319
7558970788310601413
8062875494211301507
90707848106012721696
100785942117814131884
Sheet And Plate Thickness and Weight – Metric Units
Plate ThicknessWeight
(mm)(kg/m2)
1.612.6
215.7
2.519.6
323.6
3.225.1
431.4
539.3
647.1
862.8
1078.5
12.598.1
15118
20157
22.5177
25196
30236
32251
35275
40314
45353
50393
55432
60471
65510
70550
75589
80628
90707
100785
110864
120942
1301051
1501178
1601256
1801413
2001570
2501963
Hot Rolled Plate Chemical Composition: IS 2062/2011
GradeLadle Analysis %, maxCE, maxMethod of Deoxidation
QualityCMnSPSi
E 250A0.231.50.0450.0450.40.42Killed
BR, B00.221.50.0450.0450.40.41Killed
C0.21.50.040.040.40.39Killed
E 275A0.231.50.0450.0450.40.43Killed
BR, B00.221.50.0450.0450.40.42Killed
C0.21.50.040.040.40.41Killed
E 300A, BR, B00.21.50.0450.0450.450.44Killed
C0.21.50.040.040.450.44Killed
E 350A, BR, B00.21.550.0450.0450.450.47Killed
C0.21.60.040.040.450.5Killed
E 450A, BR0.221.650.0450.0450.450.52Killed

Hot Rolled Plate Mechanical Properties : 2062 / 2011

Grade DesignationQualityUTS MpaYST Mpa% ElongationInternal Bend Diameter MinCharpy Impact Test
MinMin
<2020-40>4025>25Temp 0CJ, Min
E-250A410250240230232t3t––
BRRT27
B0027
C(-) 2027
E-275A430275265255222t3t––
E-275BRRT27
B0027
C(-) 2027
E-300A440300290280222t–––
E-300BRRT27
B0027
C(-) 2027
E-350A490350330320222t–––
E-350BRRT27
B0027
C(-) 2027
E-410A540410390380202t–––
E-410BRRT25
B0025
C(-) 2025
E-450A570450430420202.5t–––
BRRT20

Hot Rolled Plate Chemical Composition: API 5L

GradeC2)SiMn2)PSVNbTiOtherCEIIWCEPcm
max.max.max.max.max.max.max.max.max.max.
L210 / A0.22–0.90.030.03–––1,7)––
L245 / B0.26–1.20.030.033,4)3,4)4)1,7)––
L290 / X420.26–1.30.030.034)4)4)1,7)––
L320 / X460.26–1.40.030.034)4)4)1,7)––
L360 / X520.26–1.40.030.034)4)4)1,7)––
L390 / X560.26–1.40.030.034)4)4)1,7)––
L415 / X600,265)–1,405)0.030.036)6)6)1,7)––
L450 / X650,265)–1,455)0.030.036)6)6)1,7)––
L485 / X700,265)–1,655)0.030.036)6)6)1,7)––
L245N / BN0.240.41.20.0250.0153)3)0.047,9)0.430.25
L290N / X42N0.240.41.20.0250.0150.060.050.047,9)0.430.25
L320N / X46N0.240.41.40.0250.0150.070.050.044,7,9)0.430.25
L360N / X52N0.240.451.40.0250.0150.10.050.044,7,9)0.430.25
L390N / X56N0.240.451.40.0250.0150,105)0.050.044,7,9)0.430.25
L415N / X60N0,245)0,455)1,405)0.0250.0150,105)0,055)0,045)6,7,8)as agreed
L245M / BM0.220.451.20.0250.0150.050.050.047,9)0.430.25
L290M / X42M0.220.451.30.0250.0150.050.050.047,9)0.430.25
L320M / X46M0.220.451.30.0250.0150.050.050.047,9)0.430.25
L360M / X52M0.220.451.40.0250.0154)4)4)7,9)0.430.25
L390M / X56M0.220.451.40.0250.0154)4)4)7,9)0.430.25
L415M / X60M0,125)0,455)1,605)0.0250.0156)6)6)7,8)0.430.25
L450M / X65M0,125)0,455)1,605)0.0250.0156)6)6)7,8)0.430.25
L485M / X70M0,125)0,455)1,705)0.0250.0156)6)6)7,8)0.430.25
L415MS / X60MS0.10.451.450.020,00217)0.080.060.064,11,12,13)–0.21
L450MS / X65MS0.10.451.60.020,00217)0.10.060.064,11,12,13,15)–0.22
L245NE / BNE0.180.41.20.0250.015–––14)0.420.25
L290NE / X42NE0.190.41.20.0250.0150.060.050.0414)0.420.25
L360NE / X52NE0.220.451.40.0250.0150.10.050.044,14)0.430.25
L415NE / X60NE0.230,455)1,405)0.0250.0150,105)0,055)0,045)4,13,14)as agreed
L245ME / BME0.180.451.20.0250.0150.050.05–14)0.40.25
L290ME / X42ME0.180.451.30.0250.0150.050.05–14)0.40.25
L360ME / X52ME0.180.451.40.0250.0150.060.060.0514)0.410.25
L415ME / X60ME0,125)0.451.60.0250.0150.090,0810)0.074,16)0.420.25
L450ME / X65ME0,125)0.451.60.0250.0150.090,0810)0.074,16)0.430.25
L485ME / X70ME0,125)0.451.70.0250.0150.110,0810)0.074,16)0.430.25

1. Cu ≤ 0,50 %, Ni ≤ 0,50 %, Cr ≤ 0,50 %, Mo ≤ 0,15 %
2. For each reduction of 0,01 % below the established maximum for C, an increase of 0,05 % Mn is allowed, up to a maximum of: 1,65 % for the varieties ≥ L245 or B, but ≤ L360 or X52; 1,75 % for varieties > L360 or X52 but < L485 or X70; 2,00 % for varieties ≥ L485 or X70, but ≤ L555 or X80; 2,20 % for varieties > L555 or X80; for sour gas application (S) and natural gas pipeline (E), a maximum increase of 0,20 % above the corresponding maximum value of Mn is allowed.
3. Unless otherwise agreed, Nb + V ≤ 0.06 %
4. Nb + V + Ti ≤ 0,15 %
5. Unless otherwise agreed.
6. Unless otherwise agreed, Nb + V + Ti ≤ 0,15 %.
7. No intentional additions of B are allowed and the remaining B must be ≤ 0.001 %.
8. Unless otherwise agreed: Cu ≤ 0.50 %, Ni ≤ 0.50 %, Cr ≤ 0.50 % and Mo ≤ 0.50 %.
9. Unless otherwise agreed: Cu ≤ 0,50 %, Ni ≤ 0,30 %, Cr ≤ 0,30 % und Mo ≤ 0,15 %.
10. If higher Nb limits are used, the following equation must be satisfied: Nb + C ≤ 0.20 %.
11. Algesamt ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2:1 (not applicable to Ti-calmed or Ti-treated steel); Cu ≤ 0,35 % (acc. to Agreement: Cu ≤ 0.10 %); Ni ≤ 0.30 %; Cr ≤ 0.30 %; Mo ≤ 0.15 %; B ≤ 0.0005 %.
12. For welded pipes where Ca is intentionally added, this shall apply unless otherwise agreed: Ca/S ≥ 1.5, when S > 0,001 5 %. For seamless and welded pipes, the Ca content ≤ must be 0.006 %.
13. By agreement Mo ≤ 0,35 %.
14. 0,015 % ≤ Altotal ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2/1, Cu ≤ 0,25 %; Ni ≤ 0,30 %; Cr ≤ 0,30 %; Mo ≤ 0,10 %
15. By agreement Cr ≤ 0,45 %.
16. 0,015 % ≤ Altotal ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2/1, Cu ≤ 0,50 %; Ni ≤ 0,50 %; Cr ≤ 0,30 %; Mo ≤ 0,35 %
17. The maximum content for S may be increased to 0,006 %. In the case of higher S, lower ratios of Ca/S may be agreed.

Hot Rolled Plate Mechanical Properties : API 5L

GradeYSTUTS% ElongationImpact 0°CDWTT 0°C
MPaMPa%J%
Gr. Bmin. 24541529,54)685)605)
X 42min. 29041529,54)685)605)
X 46min. 32043528,54)685)605)
X 52min. 36046027,04)685)605)
X 56min. 39049025,54)685)605)
X 60min. 41552024,04)685)605)
X 65min. 45053523,54)685)605)
X 70min 48557022,54)685)605)

1. Values for pipe circumference tests
2. Not applicable
3. Mean value of two tests
4. Elongation on a 2-inch test specimen for a coil thickness of ≥ 8.42 mm, for smaller thicknesses correspondingly lower minimum elongations apply
5. Mean value of all heats

Hot Rolled Plate Chemical Composition : IS 10748/2004

GradeC% maxMn% maxP% maxS% max
I0.10.50.040.04
II0.120.60.040.04
III0.161.20.040.04
IV0.21.30.040.04
V0.251.30.040.04
CE: 0.45 max for grades IV and V

Hot Rolled Plate Mechanical Properties : IS 10748/2004

GradeYST MpaUTS Mpa% Elongation
117029030
221033028
324041025
427543020
531049015

Rolling and Cutting Tolerance as per IS:1852 - 1985 (Reaffirmed 2003)

Tolerance on Width of Strip Supplied with as Rolled Edges

Width (mm)Tolerance (mm)
>900 to 1250+ 30, – 0
> 1250 to 1550+ 35, – 0
> 1550 to 2000+ 40, – 0

Tolerance on Thickness for Strip above 500 mm width

Width (mm)Tolerance on thickness (mm)
> 1.6 to 2> 2 to 3> 3 to 5> 5 to 8> 8 to 10
>500 >X ≥ 1250± 0.18± 0.20± 0.25± 0.30± 0.35
1250 >X ≥1550± 0.20± 0.25± 0.30± 0.35± 0.40
1550 >X ≥2000± 0.22± 0.28± 0.35± 0.40± 0.40
Please enable JavaScript in your browser to complete this form.
Scroll to Top