MS COIL & PLATE
HOT ROLLED COIL (1.4 – 25.4 MM)
Hot rolled steel coil provides excellent properties, like high strength, high toughness, and good weldability. It is widely used in manufacturing of pipes, construction, machinery, boiler, pressure vessel, and other manufacturing industries. It is also material for cold-rolled products and galvanized steel products. As a hot-rolled coil supplier, JND Traders Pvt Ltd offers quality hot-rolled coil at a competitive price. Welcome to contact us for more details!
Material Specifications
MaterialMild/ Carbon steel
Thickness 1.4 – 25.4 mm
Width 1000-2000 mm
Length Coil form or As per requirement for Plate
Max. weight 30 MT aprox, depads on thickness and width
Grade API 5L Gr.B to X80M PSL 1 or 2, IS 10748 Gr.3, IS 2062 E250 to E450.
Hot Rolled Coil Chemical Composition: IS 2062/2011
| Grade | Ladle Analysis %, max | CE, max | Method of Deoxidation | |||||
| Quality | C | Mn | S | P | Si | |||
| E 250 | A | 0.23 | 1.5 | 0.045 | 0.045 | 0.4 | 0.42 | Killed |
| BR, B0 | 0.22 | 1.5 | 0.045 | 0.045 | 0.4 | 0.41 | Killed | |
| C | 0.2 | 1.5 | 0.04 | 0.04 | 0.4 | 0.39 | Killed | |
| E 275 | A | 0.23 | 1.5 | 0.045 | 0.045 | 0.4 | 0.43 | Killed |
| BR, B0 | 0.22 | 1.5 | 0.045 | 0.045 | 0.4 | 0.42 | Killed | |
| C | 0.2 | 1.5 | 0.04 | 0.04 | 0.4 | 0.41 | Killed | |
| E 300 | A, BR, B0 | 0.2 | 1.5 | 0.045 | 0.045 | 0.45 | 0.44 | Killed |
| C | 0.2 | 1.5 | 0.04 | 0.04 | 0.45 | 0.44 | Killed | |
| E 350 | A, BR, B0 | 0.2 | 1.55 | 0.045 | 0.045 | 0.45 | 0.47 | Killed |
| C | 0.2 | 1.6 | 0.04 | 0.04 | 0.45 | 0.5 | Killed | |
| E 450 | A, BR | 0.22 | 1.65 | 0.045 | 0.045 | 0.45 | 0.52 | Killed |
Hot Rolled Coil Mechanical Properties : 2062 / 2011
| Grade Designation | Quality | UTS Mpa | YST Mpa | % Elongation | Internal Bend Diameter Min | Charpy Impact Test | ||||
| Min | Min | |||||||||
| <20 | 20-40 | >40 | 25 | >25 | Temp 0C | J, Min | ||||
| E-250 | A | 410 | 250 | 240 | 230 | 23 | 2t | 3t | – | – |
| BR | RT | 27 | ||||||||
| B0 | 0 | 27 | ||||||||
| C | (-) 20 | 27 | ||||||||
| E-275 | A | 430 | 275 | 265 | 255 | 22 | 2t | 3t | – | – |
| E-275 | BR | RT | 27 | |||||||
| B0 | 0 | 27 | ||||||||
| C | (-) 20 | 27 | ||||||||
| E-300 | A | 440 | 300 | 290 | 280 | 22 | 2t | – | – | – |
| E-300 | BR | RT | 27 | |||||||
| B0 | 0 | 27 | ||||||||
| C | (-) 20 | 27 | ||||||||
| E-350 | A | 490 | 350 | 330 | 320 | 22 | 2t | – | – | – |
| E-350 | BR | RT | 27 | |||||||
| B0 | 0 | 27 | ||||||||
| C | (-) 20 | 27 | ||||||||
| E-410 | A | 540 | 410 | 390 | 380 | 20 | 2t | – | – | – |
| E-410 | BR | RT | 25 | |||||||
| B0 | 0 | 25 | ||||||||
| C | (-) 20 | 25 | ||||||||
| E-450 | A | 570 | 450 | 430 | 420 | 20 | 2.5t | – | – | – |
| BR | RT | 20 | ||||||||
Hot Rolled Coil Chemical Composition: API 5L
| Grade | C2) | Si | Mn2) | P | S | V | Nb | Ti | Other | CEIIW | CEPcm |
| max. | max. | max. | max. | max. | max. | max. | max. | max. | max. | ||
| L210 / A | 0.22 | – | 0.9 | 0.03 | 0.03 | – | – | – | 1,7) | – | – |
| L245 / B | 0.26 | – | 1.2 | 0.03 | 0.03 | 3,4) | 3,4) | 4) | 1,7) | – | – |
| L290 / X42 | 0.26 | – | 1.3 | 0.03 | 0.03 | 4) | 4) | 4) | 1,7) | – | – |
| L320 / X46 | 0.26 | – | 1.4 | 0.03 | 0.03 | 4) | 4) | 4) | 1,7) | – | – |
| L360 / X52 | 0.26 | – | 1.4 | 0.03 | 0.03 | 4) | 4) | 4) | 1,7) | – | – |
| L390 / X56 | 0.26 | – | 1.4 | 0.03 | 0.03 | 4) | 4) | 4) | 1,7) | – | – |
| L415 / X60 | 0,265) | – | 1,405) | 0.03 | 0.03 | 6) | 6) | 6) | 1,7) | – | – |
| L450 / X65 | 0,265) | – | 1,455) | 0.03 | 0.03 | 6) | 6) | 6) | 1,7) | – | – |
| L485 / X70 | 0,265) | – | 1,655) | 0.03 | 0.03 | 6) | 6) | 6) | 1,7) | – | – |
| L245N / BN | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 3) | 3) | 0.04 | 7,9) | 0.43 | 0.25 |
| L290N / X42N | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | 7,9) | 0.43 | 0.25 |
| L320N / X46N | 0.24 | 0.4 | 1.4 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | 4,7,9) | 0.43 | 0.25 |
| L360N / X52N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | 4,7,9) | 0.43 | 0.25 |
| L390N / X56N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0,105) | 0.05 | 0.04 | 4,7,9) | 0.43 | 0.25 |
| L415N / X60N | 0,245) | 0,455) | 1,405) | 0.025 | 0.015 | 0,105) | 0,055) | 0,045) | 6,7,8) | as agreed | |
| L245M / BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | 7,9) | 0.43 | 0.25 |
| L290M / X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | 7,9) | 0.43 | 0.25 |
| L320M / X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | 7,9) | 0.43 | 0.25 |
| L360M / X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | 4) | 4) | 4) | 7,9) | 0.43 | 0.25 |
| L390M / X56M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | 4) | 4) | 4) | 7,9) | 0.43 | 0.25 |
| L415M / X60M | 0,125) | 0,455) | 1,605) | 0.025 | 0.015 | 6) | 6) | 6) | 7,8) | 0.43 | 0.25 |
| L450M / X65M | 0,125) | 0,455) | 1,605) | 0.025 | 0.015 | 6) | 6) | 6) | 7,8) | 0.43 | 0.25 |
| L485M / X70M | 0,125) | 0,455) | 1,705) | 0.025 | 0.015 | 6) | 6) | 6) | 7,8) | 0.43 | 0.25 |
| L415MS / X60MS | 0.1 | 0.45 | 1.45 | 0.02 | 0,00217) | 0.08 | 0.06 | 0.06 | 4,11,12,13) | – | 0.21 |
| L450MS / X65MS | 0.1 | 0.45 | 1.6 | 0.02 | 0,00217) | 0.1 | 0.06 | 0.06 | 4,11,12,13,15) | – | 0.22 |
| L245NE / BNE | 0.18 | 0.4 | 1.2 | 0.025 | 0.015 | – | – | – | 14) | 0.42 | 0.25 |
| L290NE / X42NE | 0.19 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | 14) | 0.42 | 0.25 |
| L360NE / X52NE | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | 4,14) | 0.43 | 0.25 |
| L415NE / X60NE | 0.23 | 0,455) | 1,405) | 0.025 | 0.015 | 0,105) | 0,055) | 0,045) | 4,13,14) | as agreed | |
| L245ME / BME | 0.18 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | – | 14) | 0.4 | 0.25 |
| L290ME / X42ME | 0.18 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | – | 14) | 0.4 | 0.25 |
| L360ME / X52ME | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.06 | 0.06 | 0.05 | 14) | 0.41 | 0.25 |
| L415ME / X60ME | 0,125) | 0.45 | 1.6 | 0.025 | 0.015 | 0.09 | 0,0810) | 0.07 | 4,16) | 0.42 | 0.25 |
| L450ME / X65ME | 0,125) | 0.45 | 1.6 | 0.025 | 0.015 | 0.09 | 0,0810) | 0.07 | 4,16) | 0.43 | 0.25 |
| L485ME / X70ME | 0,125) | 0.45 | 1.7 | 0.025 | 0.015 | 0.11 | 0,0810) | 0.07 | 4,16) | 0.43 | 0.25 |
1. Cu ≤ 0,50 %, Ni ≤ 0,50 %, Cr ≤ 0,50 %, Mo ≤ 0,15 %
2. For each reduction of 0,01 % below the established maximum for C, an increase of 0,05 % Mn is allowed, up to a maximum of: 1,65 % for the varieties ≥ L245 or B, but ≤ L360 or X52; 1,75 % for varieties > L360 or X52 but < L485 or X70; 2,00 % for varieties ≥ L485 or X70, but ≤ L555 or X80; 2,20 % for varieties > L555 or X80; for sour gas application (S) and natural gas pipeline (E), a maximum increase of 0,20 % above the corresponding maximum value of Mn is allowed.
3. Unless otherwise agreed, Nb + V ≤ 0.06 %
4. Nb + V + Ti ≤ 0,15 %
5. Unless otherwise agreed.
6. Unless otherwise agreed, Nb + V + Ti ≤ 0,15 %.
7. No intentional additions of B are allowed and the remaining B must be ≤ 0.001 %.
8. Unless otherwise agreed: Cu ≤ 0.50 %, Ni ≤ 0.50 %, Cr ≤ 0.50 % and Mo ≤ 0.50 %.
9. Unless otherwise agreed: Cu ≤ 0,50 %, Ni ≤ 0,30 %, Cr ≤ 0,30 % und Mo ≤ 0,15 %.
10. If higher Nb limits are used, the following equation must be satisfied: Nb + C ≤ 0.20 %.
11. Algesamt ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2:1 (not applicable to Ti-calmed or Ti-treated steel); Cu ≤ 0,35 % (acc. to Agreement: Cu ≤ 0.10 %); Ni ≤ 0.30 %; Cr ≤ 0.30 %; Mo ≤ 0.15 %; B ≤ 0.0005 %.
12. For welded pipes where Ca is intentionally added, this shall apply unless otherwise agreed: Ca/S ≥ 1.5, when S > 0,001 5 %. For seamless and welded pipes, the Ca content ≤ must be 0.006 %.
13. By agreement Mo ≤ 0,35 %.
14. 0,015 % ≤ Altotal ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2/1, Cu ≤ 0,25 %; Ni ≤ 0,30 %; Cr ≤ 0,30 %; Mo ≤ 0,10 %
15. By agreement Cr ≤ 0,45 %.
16. 0,015 % ≤ Altotal ≤ 0,060 %; N ≤ 0,012 %; Al/N ≥ 2/1, Cu ≤ 0,50 %; Ni ≤ 0,50 %; Cr ≤ 0,30 %; Mo ≤ 0,35 %
17. The maximum content for S may be increased to 0,006 %. In the case of higher S, lower ratios of Ca/S may be agreed.
Hot Rolled Coil Mechanical Properties : API 5L
| Grade | YST | UTS | % Elongation | Impact 0°C | DWTT 0°C |
| MPa | MPa | % | J | % | |
| Gr. B | min. 245 | 415 | 29,54) | 685) | 605) |
| X 42 | min. 290 | 415 | 29,54) | 685) | 605) |
| X 46 | min. 320 | 435 | 28,54) | 685) | 605) |
| X 52 | min. 360 | 460 | 27,04) | 685) | 605) |
| X 56 | min. 390 | 490 | 25,54) | 685) | 605) |
| X 60 | min. 415 | 520 | 24,04) | 685) | 605) |
| X 65 | min. 450 | 535 | 23,54) | 685) | 605) |
| X 70 | min 485 | 570 | 22,54) | 685) | 605) |
1. Values for pipe circumference tests
2. Not applicable
3. Mean value of two tests
4. Elongation on a 2-inch test specimen for a coil thickness of ≥ 8.42 mm, for smaller thicknesses correspondingly lower minimum elongations apply
5. Mean value of all heats
Hot Rolled Coil Chemical Composition : IS 10748/2004
| Grade | C% max | Mn% max | P% max | S% max |
|---|---|---|---|---|
| I | 0.1 | 0.5 | 0.04 | 0.04 |
| II | 0.12 | 0.6 | 0.04 | 0.04 |
| III | 0.16 | 1.2 | 0.04 | 0.04 |
| IV | 0.2 | 1.3 | 0.04 | 0.04 |
| V | 0.25 | 1.3 | 0.04 | 0.04 |
| CE: 0.45 max for grades IV and V |
Hot Rolled Coil Mechanical Properties : IS 10748/2004
| Grade | YST Mpa | UTS Mpa | % Elongation |
|---|---|---|---|
| 1 | 170 | 290 | 30 |
| 2 | 210 | 330 | 28 |
| 3 | 240 | 410 | 25 |
| 4 | 275 | 430 | 20 |
| 5 | 310 | 490 | 15 |
Rolling and Cutting Tolerance as per IS:1852 - 1985 (Reaffirmed 2003)
Tolerance on Width of Strip Supplied with as Rolled Edges
| Width (mm) | Tolerance (mm) |
|---|---|
| >900 to 1250 | + 30, – 0 |
| > 1250 to 1550 | + 35, – 0 |
| > 1550 to 2000 | + 40, – 0 |
API 5L PIPE OUTSIDE DIAMETER TOLERANCE
| Width (mm) | Tolerance (mm) |
|---|---|
| >900 to 1250 | + 30, – 0 |
| > 1250 to 1550 | + 35, – 0 |
| > 1550 to 2000 | + 40, – 0 |
Tolerance on Thickness for Strip above 500 mm width
| Width (mm) | Tolerance on thickness (mm) | ||||
| > 1.6 to 2 | > 2 to 3 | > 3 to 5 | > 5 to 8 | > 8 to 10 | |
| >500 >X ≥ 1250 | ± 0.18 | ± 0.20 | ± 0.25 | ± 0.30 | ± 0.35 |
| 1250 >X ≥1550 | ± 0.20 | ± 0.25 | ± 0.30 | ± 0.35 | ± 0.40 |
| 1550 >X ≥2000 | ± 0.22 | ± 0.28 | ± 0.35 | ± 0.40 | ± 0.40 |